Bai-Kakaji Polymers: a ₹365 crore packaging maker that wants ₹1,000 crore by FY29

Bai-Kakaji Polymers makes the plastic preforms and caps behind many Indian bottled drinks. It sold ₹365 crore of goods last year and earned ₹27 crore of profit. Management now says it wants ₹1,000 crore of sales by FY29. The stock is up about 55% from its IPO price, and Sunil Singhania's Abakkus fund reportedly bought in at about ₹200 in July. Is the story as good as the headline?

Bai-Kakaji Polymers (BSE SME: BAIKAKAJI) - Share price: ₹289 (as of 2 October 2026, per screener.in) - Market cap: ₹619 crore - P/E: 27.4x on screener.in, which uses its own earnings figure. Using FY26 PAT of ₹26.98 crore gives about 23x. Nilkamal trades at about 21x and Shaily Engineering at about 78x - 52-week range: ₹143 to ₹329, so the price is about 12% below its high

What the company does

Bai-Kakaji was incorporated in 2013 in Latur, Maharashtra. The Mundada family runs it. It makes PET preforms (the small test-tube shapes that are blown into plastic bottles), plastic caps and closures. About 96% of FY26 sales came from this "rigid" packaging.

- 4 plants make the rigid products. Machines come from Husky, Sacmi and ASB. - 822 active customers, per the company. - Named customers: Reliance, Tata Group, Patanjali, Clear and Bailley. - The top 20 customers have been with the company for 11 years on average. - Indicative sales mix by end use: beverages 38%, FMCG 26%, edible oil 18%, pharma and others 18%.

In February 2026 the company made Mundada Polymers, a maker of flexible films such as shrink film and stretch film, its wholly-owned subsidiary. FY26 was the first year flexible films showed up in its numbers, at ₹14 crore. That is about 4% of the total.

The stock lists on BSE SME, the exchange's separate board for small companies. Trading is usually thinner there. That can mean fewer buyers and sellers, a wider gap between buy and sell prices, and more trouble selling a large holding than on the main board. It listed on 31 December 2025 at ₹190, a 2.15% premium to the ₹186 issue price.

FY26: profit grew much faster than sales

Metric (₹ crore) FY25 FY26 Change ------------ Revenue 325.37 364.69 +12.1% EBITDA 33.90 48.78 +43.9% EBITDA margin 10.4% 13.4% +300 basis points PAT 18.17 26.98 +48.5% Total borrowings 109.02 65.73 -39.7% Debt-to-equity 2.04x 0.37x Sharply lower Operating cash flow -9.93 +28.04 Turned positive Net fixed assets 103.07 144.30 +40%

Source: the company's investor presentation of 12 June 2026.

Four things the headline numbers hide:

- The years are not like for like. FY26 adds the subsidiary Mundada Polymers to Bai-Kakaji. FY25 covers Bai-Kakaji alone, so the two years are not directly comparable. - Not all profit came from the main business. FY26 profit before tax of ₹36.01 crore includes ₹10.09 crore of other income (about 28%) and a one-time ₹3.44 crore item (about 10%). EBITDA leaves both out. - Margins eased in the second half. From the company's figures, EBITDA margin was about 14.9% in April to September 2025 and 12.1% in October 2025 to March 2026. - Spending is heavy. Depreciation more than doubled, from ₹8.45 crore to ₹18.43 crore. Operating cash flow was ₹28 crore, but the company spent ₹73 crore on assets. Cash flow after that spending was about -₹45 crore, so the business needed outside money. The IPO was one big source.

The IPO and where the money went

The IPO ran from 23 to 26 December 2025 at a price band of ₹177 to ₹186. Investors bid for 5.38 times the shares on offer. The whole ₹105.17 crore was a fresh issue, meaning the company issued new shares and no promoter sold any. After ₹11.60 crore of issue costs, about ₹93.6 crore was left for the company to use.

Fourteen anchor investors put in ₹29.90 crore on 22 December 2025, at ₹186 per share. I could not find their names in the sources I checked. Half of their shares were locked in until 29 January 2026 and the rest until 30 March 2026. Both dates have passed, so the lock-in no longer holds those shares back. I could not check whether the anchors have sold.

Use of IPO money ₹ crore ------ Repay borrowings 64.00 Solar power project 12.94 Plant and machinery 9.85 General corporate purposes 6.78 Issue expenses 11.60 Total 105.17

Promoters held 100% before the IPO, 73.55% right after it, and 74.07% at March 2026. The small rise is not explained in the sources I checked.

What management says it will do next

These are management's own forward-looking statements from its investor presentations. They are not verified facts or promises.

- Sales target: ₹1,000 crore of revenue by FY29, while keeping healthy profit margins and improving return ratios. - Capex: about ₹100 crore of growth spending is under way. - About ₹34.7 crore for the rigid business: a proposed Sacmi machine, a proposed Husky machine, and moulds and related equipment. - About ₹63.4 crore for flexible films at Mundada: a printing press, a 7-layer film line, a stretch-film line, a lamination line, a slitting line and a new building. - Capacity today: - PET preforms: about 22,600 tonnes a year, running at about 90%. - Caps and closures: about 500 crore pieces a year, running at about 84%. - Flexible films: about 8,460 tonnes a year across shrink, coating and stretch film. Shrink film ran at 96.5% in FY26, coating film at 88.9%, and stretch film at 54.8%. - A ceiling on the current plants: the company estimates its rigid plants can earn about ₹385 to ₹390 crore of sales at normal resin prices, or ₹430 to ₹440 crore when resin prices peak. - Power: about 5 megawatts of solar is running, and 2.5 to 3 megawatts more is being added with IPO money. - New sites: plants are planned in Gujarat and Kerala. - Flexible films: it plans barrier and non-barrier films, laminates and pouches for milk, UHT milk, paneer, edible oil, ghee, FMCG, baby diapers, adult diapers and sanitary pads. It expects the film business to reach near-full use by the second half of FY27. - Margin plan: better margins are expected from in-house raw-material trading, solar power, lower interest costs and a richer product mix. Gross margin has already moved from 23% in FY23 to 32% in FY26. - Debt plan: the company's plan for the IPO money projected a debt-to-equity ratio of about 0.31x for FY26. The actual figure was 0.37x. - Roadmap: become an integrated rigid and flexible packaging company, sell more to existing customers while adding new ones, use automation and renewable power, and focus on profit, cash flow and careful use of capital.

The company is also meeting investors. Its executives met Finavenue Growth Fund on 23 September and joined the Bharat Connect conference on 25 September. It says no price-sensitive information was shared. The trading window closed on 1 October and stays shut until 48 hours after the half-year results.

How the valuation compares with peers

Company Market cap (₹ crore) P/E ROCE Latest quarter sales growth --------------- Bai-Kakaji Polymers 619 27.4x 20.0% Not available Nilkamal 2,793 20.8x 10.6% -7.2% Shaily Engineering 13,840 77.8x 30.2% +22.1% Atharva Poly-Plast 213 33.0x 38.2% Not available

Source: screener.in peer table, 2 October 2026.

None of these is a pure PET preform maker, so treat the table as a rough guide. Bai-Kakaji sits between slower-growing Nilkamal and fast-growing Shaily.

CRISIL, a credit rating agency, upgraded the company on 8 June 2026 from BBB to BBB+ with a stable outlook. It rated ₹41.5 crore of bank loans. It cited the promoters' experience, a net worth of ₹175.7 crore and low borrowing. It also named three weaknesses: intense competition that limits pricing power, raw materials at 70% to 75% of costs, and many small unorganised rivals.

The Abakkus stake

Per news reports, Abakkus Venture Opportunities Fund bought 6.08 lakh shares, a 2.84% stake, for ₹12.18 crore. The average price was ₹200.34 per share in a block deal around 30 July 2026. This is news-only and is not yet confirmed by an exchange disclosure. At ₹289 that price is up about 44%.

At March 2026, promoters held 74.07%, mutual funds and other domestic institutions 7.76%, foreign investors 2.42% and the public 15.75%.

Risks to weigh

- The target needs fast growth. Going from ₹365 crore to ₹1,000 crore by FY29 means sales growing about 40% a year on average (CAGR). FY26 growth was 12%, and that figure is not like for like, because FY26 includes a subsidiary and FY25 does not. - The current plants are close to their limit. By management's own estimate, they top out near ₹385 to ₹440 crore. The rest has to come from new capacity and from flexible films, which are only 4% of sales today. - Resin prices matter. CRISIL says raw materials are 70% to 75% of the company's overall costs. The company can pass price changes on to customers, but with a delay. - Earnings quality. Other income and a one-time gain helped FY26 profit. Cash flow after capex was negative, at about -₹45 crore (operating cash flow of ₹28 crore minus ₹73 crore spent on assets). - Small-company risks. It is an SME stock with thin trading and a short public record. I could not find a customer concentration figure in the sources I checked. - Two return figures disagree. The company's deck says return on equity is above 34%. Screener.in shows 19.7%. I used the screener.in number. - The next test is close. Half-year results for April to September 2026 are due soon. They will show whether the second-half margin dip was a blip.

The number to watch The ₹1,000 crore target needs about 40% growth a year, while the company grew 12% last year. The upcoming half-year results will show whether the new capacity is really adding sales.

Note: I am not a SEBI-registered investment advisor. This article is for educational purposes only and is not investment advice. Please consult a registered financial advisor before making investment decisions.

Sources

- Screener.in: Bai-Kakaji Polymers (financials, peers, shareholding) - Investor presentation, 12 June 2026 (BSE filing) - FY26 investor presentation, 30 May 2026 (BSE filing) - CRISIL rating rationale, 8 June 2026 - Chittorgarh: Bai-Kakaji Polymers IPO details - Wealthy.in: anchor round, subscription and listing day