Shree TNB Polymers IPO closes 5 October — should you subscribe?
Shree TNB Polymers, a Silvassa pipe and plastic-sheet maker, closes its SME IPO on Monday 5 October. Profit has risen each year and cash flow is positive. But the company is small, its margins are thin, and its plants ran at only about 46% to 66% of capacity in FY26. Even so, it plans to spend most of the IPO money on new machines. Here is what a potential investor should know.
Shree TNB Polymers Limited (IPO, not yet listed) - Price band: ₹50-₹53 per share (upper band used below). Some trackers still show the earlier band of ₹47-₹52 - Market cap at upper band: about ₹113.1 crore after the issue - P/E: about 15.9x on FY26 profit after the issue (about 11.4x on pre-issue earnings per share). Listed small-cap pipe makers: Texmo Pipes about 10.4x, Malpani Pipes about 8x - Listing platform: BSE SME, listing proposed 8 October 2026
What the company does
Shree TNB Polymers was incorporated on 7 March 2007. It was formed by merging several partnership firms, and the promoters say they have over 25 years in polymer processing.
It makes plastic products in three groups:
- Pipes under the Noble brand: HDPE and PP pipes, double-wall corrugated pipes, sprinkler pipes and drip irrigation products - Solid industrial sheets under the Tirupati brand - Corrugated boards under the Wellpack brand
It has two plants in Silvassa (Dadra and Nagar Haveli) with about 24,000 tonnes a year of capacity. It sells through more than 325 dealers across Gujarat, Maharashtra, Rajasthan, Uttar Pradesh, Bihar, Karnataka and Madhya Pradesh. The promoters are Vijay Jaysukhlal Thosani (chairman) and Rasikbhai Gokalbhai Bhalodi (managing director), along with family members.
The numbers
₹ crore FY24 FY25 FY26 ------------ Total income 207.97 175.70 198.31 EBITDA 15.22 15.47 19.20 Profit after tax 5.03 5.77 7.13 Net worth 34.21 48.55 55.68 Return on equity 15.87% 13.95% 13.69%
- Revenue fell about 15% in FY25 and then rose about 13% in FY26. FY26 income is still below FY24. - PAT rose each year. The PAT margin (how much profit the company keeps from its sales) was only 2.4%, 3.3% and 3.6%. EBITDA (profit from the main business before interest, tax and some other costs) margin was 7.3%, 8.8% and 9.7%. - Operating cash flow was positive in all three years: ₹6.99 crore, ₹4.34 crore and ₹8.83 crore. That is a good sign, though cash flow can swing with the money tied up in stock and unpaid bills. - Total secured borrowing was about ₹44.56 crore and debt-to-equity was about 0.80 as of March 2026. - The company spent more than it earned on new plants and machines. Investing cash flow was minus ₹9.98 crore in FY25 and minus ₹9.23 crore in FY26.
A low-margin trade Pipe and sheet making is a volume business. Raw material is about 60% of income. Sharp price moves in plastic resin can hurt margins if the company cannot raise its own prices quickly.
The IPO
- Issue size: about ₹31.80 crore, 60 lakh fresh shares (3 lakh of them set aside for the market maker). No promoter shares are sold - Opens 28 September, closes 5 October, allotment 6 October, listing 8 October - Lot size: 2,000 shares. A retail investor must bid for at least 2 lots (4,000 shares), about ₹2.12 lakh at ₹53 - How the shares are split: anchors 28.4% (large institutions that buy first), other institutions 19%, big individual and company investors 14.3%, ordinary retail investors 33.3%, market maker 5% (Asnani Stock Broker) - Promoter holding falls from about 45.56% to about 32.76% after the issue. The 45.56% is the "promoter group": the promoters plus their relatives and associates - Subscription on 1 October: about 0.98x overall, retail about 0.84x, big non-institutional investors about 1.45x, institutions about 0.75x - Grey market premium (GMP, an unofficial price people trade at before listing): trackers differ, from ₹0 to about ₹5 on 3 October. That is not a forecast
Anchor investors
Anchor investors are large institutions that are given shares just before the IPO opens to everyone else. The company raised about ₹9.04 crore from anchors on 25 September. That is 17,06,000 shares at ₹53, about 28.4% of the issue. The anchor portion was fully taken up (1.0x).
I could not confirm the names of the anchor investors from the pages I could open, so I cannot say whether any well-known fund is among them. Check the BSE anchor allotment notice before you decide. Half of the anchor shares are locked in for 30 days and the rest for 90 days from the allotment date. When the lock-in ends, anchors are free to sell, which can push the price down.
Where the money goes
Use ₹ crore ------ Buy new machinery 15.86 Repay borrowings 5.62 Rooftop solar panels at the new plant 2.60 Pre-engineered building for the new plant 1.32 General corporate purposes Balance
About ₹25.4 crore is for specific uses. Most of it goes to new capacity, so the issue only pays off if the extra machines run full.
Is the price fair?
At ₹53 the company is valued at about ₹113.1 crore. That is about 15.9 times FY26 profit and about 1.5 times book value (using the net asset value per share of ₹36.29 in the offer papers).
Listed peer Market cap (₹ crore) P/E --------- Shree TNB Polymers (at ₹53, after issue) about 113 about 15.9 Texmo Pipes & Products about 157 about 10.4 Malpani Pipes & Fittings (6 Aug 2026) about 72 about 8.0
On these two peers, Shree TNB is priced at a premium. Its return on equity (13.69%) is higher than Texmo's reported figure (about 5%). But its FY26 profit margin was only 3.6%, so a modest move in selling prices or raw material cost can change profit a lot. The peers are also small and their shares do not trade often, so the comparison is rough. Peer figures come from third-party pages and may be a few weeks old. The 11.4x P/E often quoted for this issue uses profit before new shares are added, so it makes the price look cheaper than it is after the issue.
Risks the company discloses
- Customer concentration: the top ten customers gave about 30% of FY26 revenue (29.97%), and the largest alone gave 11.05%. The top ten gave 29.11% in FY25 - Raw materials: there are no long-term supply agreements, and material cost is about 60% of income - Leased premises: operations depend on leased facilities - Unused capacity: FY26 use of existing capacity was only about 46% to 66% across its plants, yet ₹15.86 crore of the issue goes to new machines - SME shares can have few buyers and sellers, so it may be hard to sell quickly at the price you want
Should you apply?
- Steady profit growth, positive operating cash flow and a moderate debt level argue for it - A premium P/E against peers, thin margins, a largest customer at 11% of sales, plants that are far from full, and an anchor list I could not confirm argue against it - The minimum bid is ₹2.12 lakh, so one mistake is costly
Note: I am not a SEBI-registered investment advisor. This article is for educational purposes only and is not investment advice. Please consult a registered financial advisor before making investment decisions.
Sources
- https://www.ipomarket.in/ipo/shree-tnb-polymers - https://www.angelone.in/ipo/shree-tnb-polymers-ipo - https://www.chittorgarh.com/ipo/shree-tnb-polymers-ipo/3095/ - https://www.gmpipowatch.in/ipo/shree-tnb-polymers - https://zerodha.com/ipo/459086/shree-tnb-polymers - https://www.indiaipo.in/ipo-blogs/shree-tnb-polymers-ipo - https://www.5paisa.com/stocks/texmopipes-share-price - https://www.motilaloswal.com/share-market/peer-comparison/malpani-pipes-fittings-ltd