Abakkus Venture Opportunities Fund buys into Anawil Wire and Engineering

Sunil Singhania's Abakkus didn't just anchor this SME IPO — it came back and bought more in the open market after the stock listed. That pattern, in Anawil Wire and Engineering Ltd, a windmill-tower maker headquartered in Gujarat, is worth a closer look — alongside a balance sheet carrying substantial borrowings relative to its size, a fact the anchor-investor story tends to overshadow.

CMP ₹445 · Market cap ₹1,113 crore · P/E 30.4x (screener.in, close of Sept 18, 2026 — the most recent trading session; Sept 20 falls on a non-trading Sunday, so check the live price before acting) — now at a premium to Inox Wind, the closest listed sector reference point, whose trailing P/E has fallen to 24.9x, despite Inox being a much bigger business by revenue.

What Anawil Wire and Engineering actually does — and how long it's actually done it

Anawil was incorporated in January 2021 and began commercial operations in April 2021 fabricating weldmesh and assembling boiler accessories and paper-machinery parts — a different business entirely. It shifted focus to the wind sector in 2023 and has manufactured windmill towers since; its track record in the business this IPO is actually about therefore runs a few years, not its full incorporation history. Today it makes custom tubular steel windmill towers up to 140 metres tall for wind-turbine-generator (WTG) OEMs and renewable energy companies, from two plants — in Kutch (Gujarat) and Koppal (Karnataka) — with a combined annual capacity of 612 towers.

FY Revenue from operations Net profit Towers produced Capacity utilisation --------------- FY24 ₹54.07 crore ₹12.30 crore 114 38% FY25 ₹78.59 crore not separately disclosed 135 45% FY26 ₹143.27 crore (+81% YoY) ₹36.63 crore (+198% vs FY24) 210 48.17%

FY26 utilisation is measured against a higher effective base, because the Kutch (Gujarat) plant began commercial operations in March 2026 — the last month of the year — and contributed 16 of those 210 towers; the 48.17% figure works out consistently once that partial-year Kutch contribution is folded in, so it isn't a red flag by itself. EBITDA margin came in at roughly 42.6% in FY26 (₹61.09 crore EBITDA) — a high number at the operating level itself, not just something that shows up after tax.

A 43% EBITDA margin this early in a young product line's history deserves scrutiny

Its reported FY26 EBITDA margin is high and merits a closer look at what's driving it — order mix, capacity utilisation, one-off pricing — before assuming it holds steady through a full industry cycle, rather than being taken at face value just because the headline number looks strong.

What it does mean is that the company's full 612-tower run-rate, with Kutch operating a complete year, is genuinely untested — FY27 will be the first year that can show whether Anawil can actually fill that expanded capacity with orders.

What the anchor-investor story skips: debt, dilution and a capacity question

Of the ₹142.69 crore fresh issue (52,84,800 shares at the ₹270 upper band; total issue size ₹177.81 crore including the OFS), ₹115 crore was earmarked specifically to repay or prepay existing bank/financial-institution borrowings — against total debt of about ₹130.9 crore as of May 2026, a meaningful borrowing load relative to the company's size. In FY26 the company also spent roughly ₹97.27 crore on capex (plant, machinery, construction) building out its two-plant capacity. The IPO's ₹35.12 crore offer-for-sale component was entirely from one selling shareholder, promoter Nimish Kumar Rameshchandra Vashi, diluting the promoter group's stake from about 89.35% pre-IPO to roughly 65.26% post-listing (that dilution figure is from secondary IPO-analysis sources rather than the RHP itself, so treat it as approximate). Put together: Anawil went into its IPO with meaningful borrowings, one selling shareholder offered shares through the OFS, and most of the new money raised is deleveraging the balance sheet rather than funding fresh growth — a materially different story than "growth capital for a fast-scaling business." One more thing the IPO document itself discloses: the company's promoters do not have prior significant experience in this specific industry segment — Anawil only pivoted into wind-tower manufacturing in 2023, and its own risk factors say so plainly, not just secondary commentary.

Competition for orders, and a capacity ramp still mid-way through

India's installed wind capacity stood at about 58.14 GW as of July 2026, against a government target of 100 GW by 2030 — meaning roughly 41.9 GW of new capacity is still needed, or about 10.5 GW a year on average over the next four years. Converting that into a number of towers depends heavily on what turbine size is assumed (newer Indian installations range roughly 3-5 MW per turbine): at 5 MW, that's around 2,100 towers a year nationally; at 3 MW, closer to 3,500. Anawil faces real competition for a share of that demand from several established players:

- CS Wind — a major global tower manufacturer with Indian operations - Windar Renewable Energy - GRI Renewable Industries - Suzlon — in-house tower-making alongside its turbine business - Inox Wind — in-house tower-making alongside its turbine business - A number of smaller regional fabricators

Whether total industry tower-capacity already exceeds near-term national demand isn't something the publicly available figures here can establish one way or the other — it would need a company-by-company capacity and order-book comparison this article doesn't have.

An early data point on that question: in September 2026, Anawil secured its largest-ever single order — ₹133.98 crore excluding GST (₹140.68 crore including it) — for 38 wind turbine towers for an FDRE (firm and dispatchable renewable energy) wind project in Andhra Pradesh, expected to be completed by Q4 FY27. It's one order, not proof the full 612-tower capacity will be filled, but it's real, recent, disclosed evidence of demand at a meaningfully larger scale than the company's historical order sizes.

Abakkus's buying didn't stop at the anchor round

Anawil's ₹50.64 crore anchor book was finalised July 31, 2026, at ₹270/share. The largest slices went to:

- Abakkus Venture Opportunities Fund — roughly 2.59 lakh shares (₹7 crore), 13.84% of the anchor pool - Carnelian AIF — roughly 2.59 lakh shares (₹7 crore), 13.84% of the anchor pool - Mint Focused Growth Fund - Motilal Oswal Finvest - Hem Growth Opportunities Fund

The IPO ran August 3-5, 2026 and closed with final subscription figures of roughly 104x retail, 165x QIB and 233x NII (headline overall multiples vary a little by source, so take any single combined figure as approximate). It listed on NSE SME on August 10, 2026.

After listing, Abakkus separately bought a further 2.49 lakh shares (1% of paid-up equity) for ₹8.15 crore at ₹326.66/share — this specific transaction is well-documented. The same news reports also mention Carnelian and Motilal Oswal making similar open-market purchases around the same time, though those specific trades are less independently verifiable than Abakkus's. A post-listing top-up is a data point worth noting, not proof of conviction on its own — it could reflect the same fund's evolving view, a different scheme's separate mandate, or portfolio-construction reasons unrelated to a fresh read on the business.

How does its valuation compare with a listed peer?

There's no exact pure-play listed tower-fabricator to compare against, so treat Inox Wind as a broad sector reference rather than a like-for-like comparable — it's an integrated wind-turbine manufacturer whose business includes tower-making within a much bigger, more diversified operation, and the CMP/market-cap dates, share counts and earnings basis (consolidated vs standalone, same reporting period) behind both P/E figures below aren't independently confirmed to match exactly.

Metric Anawil Wire and Engineering Inox Wind --------- CMP (Sept 18, 2026 close) ₹445 ₹76.8 Market cap ₹1,113 crore ₹13,273 crore FY26 revenue ₹143.27 crore ₹1,305.5 crore FY26 net profit ₹36.63 crore ₹105.68 crore P/E 30.4x 24.9x

A few weeks ago the two traded at almost identical P/E multiples (around 31x each); Anawil now looks like it's trading at a premium to Inox. Part of that gap likely isn't a re-rating of Anawil at all — Inox's own P/E is a trailing figure, and its Q1 FY27 profit of ₹64.09 crore already came in above its entire FY26 profit of ₹105.68 crore, which would pull a trailing P/E down mechanically even without much of a price move. Anawil, having just listed, doesn't yet have a comparable post-FY26 quarter to update its own multiple against. A similar or even slightly higher headline P/E than a much bigger, more established peer doesn't by itself prove Anawil is fairly valued, cheap, or expensive — it's one data point among several, and Inox is a meaningfully different, larger business whose earnings this sector shows can be lumpy from one quarter to the next.

Should you chase it?

Abakkus's anchor allocation and confirmed post-listing top-up (with reports of similar moves by Carnelian and Motilal Oswal) is a genuine, notable pattern — but it sits alongside facts that matter just as much: this IPO's fresh issue was mostly aimed at paying down existing debt rather than funding new growth, the underlying wind-tower business has only a few years of operating history despite the company's longer incorporation history, its FY26 EBITDA margin is high and hasn't been tested across a full industry cycle, its current P/E is now at a premium to a much bigger listed peer rather than at some obvious discount, and it competes for orders against several established tower-makers and integrated turbine manufacturers in a market whose actual capacity-versus-demand balance isn't established here one way or the other. SME-listed stocks can also trade with lower volumes and wider spreads than mainboard names — check current liquidity yourself before sizing any position. Read the RHP and the FY26 financials before deciding either way; this is a small, recently-listed SME stock, not a blue chip.

Note: I am not a SEBI-registered investment advisor. This article is for educational purposes only and is not investment advice. Please consult a registered financial advisor before making investment decisions.

Sources

- Anawil Wire and Engineering — screener.in - Inox Wind — screener.in - Anawil investor presentation (NSE filing) - Anawil order-win press release, Sept 2026 (NSE filing)